Detailed Product Description

Clip in type: 
Uses hanger clip hangs up a hole on both sides of the main runner and uses the hanger bolt to be fixed with ceiling; with connector to connect the main runners; Uses cross tees to form 600 x 600mm grids in main runners, then put into the 600 x 600mm panels which are combined with the inferiors and superiors
Part:
1, D-AC813 main runner: 1,800mm
2, D-AC824 middle runner: 1,200mm
3, D-AC822 vice runner: 600mm
4, D-AC822 F/M panel: it is assembled by element into size of 600 x 600mm. It is easily to be assembled and installed in the building site directly 

Accessory
1. D-AC841 connector of main runner
2. E-AT012 wall angle: 24 x 24mm
3. A-ATW2102 T-shape angle: 38 x 24mm
4. D-AC842 hanger clip: stainless steel 

Quantity usage of cell ceiling per square meter: 
1. 600 x 600mm:
Quantity for each square meter:
Main grid: 1.8m x 0.463pcs = 0.833m
Intermediate: 1.2m x 1.389pcs = 1.667m; 0.6m x 1.389pcs = 0.833m
Panel: 2.78pcs
Connector of main grid: 0.463pcs
Hanger clip: 0.8pcs
2. 1,200 x 600mm:
Quantity for each square meter:
Main grid: 1.8m x 0.463pcs = 0.833m 
Intermediate: 1.2m x 1.389pcs = 1.667m 
Panel: 1.39pcs (length for inferior is 1,200mm and for superior is 600mm)
Connector of main grid: 0.463pcs
Hanger clip: 0.8pcs 
Cell ceiling + T bar: this kind of combination is for T-bar and cell ceiling panel. Ceiling panel is the same as miner fiber board or gypsum ceiling tile to be installed with T-Bar